Description
- 5-Inch Touch Screen
- AI Failure Detection
- Auto Flow Dynamics Calibration
- Multi-Color Printing
- Cold-Air Cooling
- Active Venting Filament Drying
- 256*256*256 mm³ Print Volume
Features:
- Set up your Bambu Lab P2S in just 15 minutes, hassle-free.
- Enjoy smooth operation with meticulously designed hardware and software.
- Supports high-temperature filament printing.
- Enables stunning 16-color prints for vibrant and intricate designs.
- 20,000 mm/s² acceleration.
- Rapid printing without compromising quality.
- Seamlessly print with up to 16 colors using the AMS combo, enhancing your creativity.
- Monitor your prints remotely for added convenience.
- Max Build Plate Temperature: 100°C
- Max Speed of Tool Head: 500 mm/s
- Max Acceleration of Tool Head: 20 m/s
Specification:
Bambu Lab P2S – Technical SpecificationsPrinting Technology
| Fused Deposition Modeling |
Body
| Build Volume (W*D*H) | 256*256*256 mm³ |
| Chassis | Plastic and Steel |
| Outer Frame | Plastic and Glass |
Physical Dimensions
| Physical Dimensions | 392*406*478 mm³ |
| Net Weight | 14.9 kg |
Toolhead
| Extruder Gear | Hardened Steel |
| Nozzle | Hardened Steel |
| Max Nozzle Temperature | 300 ℃ |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built-in |
| Filament Diameter | 1.75 mm |
| Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor |
Heatbed
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack |
| Max Heatbed Temperature | 110 ℃ |
Speed
| Max Speed of Toolhead | 600 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² |
| Max Flow for Hotend | 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature) |
Filtration
| Filter Type | Activated Carbon |
| VOC Filtration | Supported |
| Particulate Matter Filtration | Supported |
Cooling
| Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
Filament Supported
| PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF |
Sensor
| Camera | Built-in; 1920*1080; 30 fps HD |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported with AMS |
| Power Loss Recovery | Supported |
Electrical Requirements
| Voltage | 100-120 VAC / 200-240 VAC, 50/60 Hz |
| Max Power* | 1200 W@220 V / 1000 W@110 V |
| PLA Steady-State Power | 200 W@220 V / 200 W@110 V（PLA printing） |
Working Temperature
10 °C–30 °C
Electronics
| Touchscreen | 5-inch 854*480 Touchscreen |
| Storage | Built-in 8 GB EMMC and USB Port |
| Control Interface | Touchscreen, mobile App, PC App |
| Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 |
| Application Processor | Quad-core 1.5 GHz ARM A7 |
| Neural Processing Unit | 2 TOPS |
Software
| Slicer | Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. |
| Supported Operating System | MacOS, Windows, Linux |
Network Control
| Ethernet | Not Available |
| Wireless Network | Dual-Band Wi-Fi |
| Network Kill Switch | Not Available |
| Removable Network Module | Not Available |
| 802.1X Network Access Control | Not Available |
Wi-Fi
| Operating Frequency | 2412 – 2472 MHz, 5150 – 5850 MHz (FCC/CE) 2400 – 2483.5 MHz, 5150 – 5850 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n |
| * To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes. |
Highlights
5-inch Refreshed Touchscreen
Cold-Air Cooling
Engineering Filaments Ready
Quick-Swap Nozzle
PMSM Servo Extruder
Silky-Smooth Liveview
Auto Flow Dynamics Calibration
Active Venting Filament Drying
AI Error Detection
The Icon in Action
The P2S is the gateway to new lifestyles, giving you the effortless creative power to explore new possibilities. You want it, you get it!
SVF1 Race Car
Another Lamp
3D Printed Slides
Pietone Keyboard
Thirst Zapper Water Shooter
The User Experience As Good As A Smartphone.
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.5-inch Touch Screen | 2nd-Gen UI
70% More Extrusion Force & Real-Time Error Detection.
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.PMSM Servo Architecture | DynaSense Extruder
Print Smooth At Every Corner, Always.
The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.Active Flowrate Compensation | Eddy Current Pressure Sensor
ON
OFFAdaptive Airflow System
Perfect Overhang No Matter the Filament or Temperature.
Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.Cold-Air Intake | Cooling Mode
Adaptive Airflow System
50°C Chamber Ready For Engineering-Grade Filaments.
The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.Heat Preservation | Carbon Filter
Peace Of Mind, Everytime You Print.
The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.AI Error Detection | 2 TOPS NPU
30-Second Nozzle Swap.
The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.Quick Swap Hotend | 1-Clip Design
No-Lag Liveview & High-Quality Timelapse.
Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media.”Stage” Lighting | 1080P High-Rate Camera
Reliable for Fiber-Reinforced Material Printing.
P2S’s extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.Hardened Steel Nozzle | Hardened Steel Extruder Gear
AMS 2 Pro
Multi-Color Printing & Filament Drying, All in One Box.
Experience our most reliable multi-color printing system yet. The AMS 2 Pro features an enhanced design for a better user experience and, crucially, introduces long-awaited filament drying. A pioneering active venting system dries filament 30% faster than sealed heating, maintaining low humidity for superior storage and print quality.Auto Venting Filament Drying | Multi-Color Printing
Electromagnetic Air VentAutomated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Dry
MoistFaster Multi-Color PrintingThe PMSM feeding motor accelerates filament feeding by 60%, saving an average of 10 minutes for every 100 filament changes.
Package Includes:
1 x Bambu Lab P1S 3D Printer
Explore more from our collection.
Reviews
There are no reviews yet.