Description
Features/Specs:
- Supply Voltage: 4 ~ 7VDC
- NeoPixel compatible
- LED Type: 8 Addressable RGB LEDs in series
- Viewing angle: 120 degrees
- Red: (620-630nm) @ 550-700mcd
- Green: (515-530nm) @ 1100-1400mcd
- Blue: (465-475nm) @ 200-400mcd
- Dimensions in: mm
- Length: 54mm
- Width: 10mm
- Height: 3mm
- Weight: 3gm
NeoPixel Strip 8 X WS2812 RGB Addressable LED
This 8-bit LED stick is just about the best way to get tons of colorful LED light with a minimum of wiring and fuss! Each stick is with an 8x LED element. Each element contains a red, green, and blue LED, as well as a tiny WS2812 controller chip. This means that each element is individually addressable and can accept brightness values of 0-255 for each of its LEDs, giving you 24 bits of color precision overall. Each LED is activated by using a special serial data protocol.
This protocol allows many LEDs to be daisy-chained together so that one microcontroller can control the whole lot – with a single data signal. Any number of these LEDs bar can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin. This LED is compatible with Neopixel & FastLED Arduino Library. This Product Known as Arduino IoT 8 x WS2812 5050 RGB LED Module NeoPixel Stick, RGB LED Strip with 8 x WS2812B RGB, fully addressable, NeoPixel-Stick with 8 WS2812 RGB-LEDs, NeoPixel Stick – 8 x 5050 RGB LED with Integrated Drivers, LED Stick – 8 x WS2812 5050 RGB LED,
Pinout:
- DI: Data from a microcontroller (or another WS2812 pixel) comes into this pin.
- 5V: This should be a regulated supply voltage between 4V and about 7V. More than that could harm the LED, less than 5V will either reduce brightness, or it just won’t turn on.
- GND: The common, ground, 0V reference supply voltage.
- DO: Data is shifted out of this pin, to be connected to the input of another pixel or left floating if it is the last link in the chain.
Explore more from our collection.
Reviews
There are no reviews yet.